Nautor Swan 44 Mk II

ISKANDER's interior is finished in rich Burmese teak joinery with a teak and holly cabin sole, complemented by cream leather upholstery. The result is a warm and welcoming interior, properly finished in the Swan tradition. Large overhead hatches and opening side ports allow excellent natural light and ventilation throughout, and LED ceiling spotlights and reading lamps create a comfortable atmosphere below at anchor or on passage. Headroom throughout is generous for a yacht of this length.

LAYOUT

The three-cabin arrangement comprises a forward cabin with V-berth converting to a double using a centre infill, with good stowage beneath and in lockers, and direct access to the forward heads compartment. The main saloon features an L-shaped settee to port and a straight settee to starboard — both usable as sea berths — centred on a large folding table with an integral battery cabinet. An aft cabin to port provides a large double berth and hanging locker, served by the second heads compartment. Both heads compartments are fitted with a marine WC, basin, and shower.

DOMESTIC

The galley is equipped with a 3 burner gas cooker with oven, a microwave, a top-loading freezer, and a combined top and front-loading refrigerator, with double stainless steel sinks and pressurised hot and cold water. Domestic hot water is supplied via the engine calorifier. Two internal shower compartments are fitted, along with a cockpit shower. Cruisair reverse-cycle air conditioning serves the accommodation (One unit 3 outlets). Eberspächer diesel heating is installed throughout. A stereo system with speakers is fitted, along with a clock and barometer.

CONSTRUCTION

• Builder: Nautor Swan (Oy Nautor Ab), Pietarsaari, Finland
• Designer: German Frers
• Year: 2002
• Hull number: 169 (final Swan 44 Mk II built)
• HIN: FI-SWN44169H202
• Hull material: GRP (fibrous reinforced plastic)
• Hull colour: White gelcoat with double navy blue waterline stripe
• Deck material: GRP with teak overlay
• Teak side decks and cockpit sole
• Teak toe rails
• Keel type: Fin with lead bulb
• Rudder type: Spade
• Sugar scoop stern with integrated bathing platform
• Stainless steel stemhead fitting with twin anchor rollers
• Boarding ladder at stern

DIMENSIONS

• LOA: 13.69m (44ft 11in)
• LWL: 10.54m (34ft 7in)
• Beam: 4.17m (13ft 8in)
• Draft: 2.19m (7ft 2in)
• Displacement: approx. 11,022kg
• Ballast: approx. 3,810kg

MECHANICAL

• Engine: Volvo Penta MD22P diesel
• Engine power: 50hp (36.5kW)
• Engine hours: to be confirmed but low
• Drive type: Saildrive( Seal reported changed 2024)
• Propeller: Three-blade folding
• Engine controls at cockpit pedestal
• Rope cutter fitted
• Hydraulic backstay adjuster
• Navtec hydraulic boom vang

PERFORMANCE

The Swan 44 Mk II is well regarded for strong upwind ability, directional stability, and a balanced helm. The Frers hull form and ballast ratio give reassuring offshore capability.

• Rig: Masthead sloop, tall aluminium mast, triple spreaders
• Sail area upwind: approx. 82.7m² (890 sq ft)
• Hull speed: approx. 7.9 knots
• Comfortable cruising speed: approx. 7 knots

TANKAGE

• Fuel: approx. 400 litres (2x200L) (87 gallons)
• Fresh water: approx. 378 litres (83 gallons)
• Black water holding tank: fitted
• Watermaker: Spectra, installed

ELECTRICAL

• AC and DC panels at navigation station
• Shore power connection
• Battery charger
• Service bank: approx. 400Ah
• Engine start battery
• Inverter: fitted
• Interior LED lighting throughout
• Reading lamps throughout
• Navigation lights

RIGGING

• Rig type: Keel-stepped masthead sloop
• Mast: Nautor aluminium, triple spreaders; repainted approximately 12 months ago
• Boom: Aluminium
• Standing rigging: Rod rigging (2012) Nautor Swan -due for replacement.
• Running rigging: Colour-coded control lines led aft to cockpit jammers
• Headsail furler: Fitted (furling jib)
• Reefing: Slab reefing, 2 reefs
• Vang: Navtec hydraulic
• Backstay: Hydraulic adjuster
• Inboard genoa tracks for improved sheeting angles
• Manual winches
• Flush deck design

SAILS

• There is a full suite of sails mostly unused or lightly used and most stored ashore.
• Mainsail: Fullbatten, Dyneema SRP 75, 47.6m², 5 fullbattens, 2 reefs, North Sails (2013)
• Furling jib: 108%, Dyneema SRP 95, 48.7m², UV leech and foot, North Sails (2013)
• Lazy bag: North Sails (2013)
• Light / medium genoa
• Reacher
• Spinnakers (2) (With snuffer)
• Heavy weather and storm sails (on board)

NAVIGATION

• Chartplotter: Simrad NSS 8, 8-inch display at helm
• Autopilot: B&G
• VHF radio: Simrad RS25 fixed; AHK-05 wireless handset for cockpit use
• Wind, speed, and depth instruments
• Radar scanner
• Compass: Pedestal-mounted
• AIS: to be confirmed

DECK

• Steering wheel: Leather-covered
• Teak cockpit seating and sole
• Cockpit table
• Electric anchor windlass
• Main anchor: Delta, with chain
• Second anchor: 45lb CQR
• Third anchor: Fortress FX-23
• Stainless steel guard rails and pushpit
• Lifelines
• Jackstays
• Cockpit shower (hot and cold)
• Sprayhood (requires replacement — see Known Defects)
• Cockpit cushions
• Wheel and pedestal cover
• Sugar scoop bathing platform with boarding ladder

CANVAS

• Sprayhood: Requires replacement (see Known Defects)
• Cockpit cushions: Fitted
• Wheel and pedestal cover: Fitted

TENDER

• Dinghy (1): Zodiac inflatable
• Outboard: Torqeedo electric
• Dinghy (2): Plastimo inflatable (2025) A little smaller than the Zodiac.

MISCELLANEOUS

• Full Nautor Swan owner's manuals and original drawings
• Stereo system
• Clock and barometer
• Full set of dock lines, fenders, and warps

EXTRA DETAILS

• Originally delivered to Chicago, USA; sailed exclusively on freshwater (Lake Michigan) under first ownership
• Refitted at Nautor Swan Villefranche (2012): rod rigging replacement and EU customs importation completed
• New North Sails wardrobe commissioned (2013)
• Mast repainted approximately 12 months ago

TITLE DOCUMENTS AND TAX

French registration (Acte de Francisation) — francisation application documentation and power of attorney seen (2012); completed Acte de Francisation to be provided prior to completion

Note: EU VAT was paid on formal importation into France in 2012. Buyers intending to cruise outside EU waters, or to register the vessel in the UK, should seek independent advice on their VAT position for their intended cruising area prior to purchase.

• Listed below are the documents/or copies which we have seen on listing this yacht.
• Builder's Certificate (US Coast Guard CG-1261, Swan 44/169, 2002) —(Oy Nautor Ab)
• Full chain of title -Bills of sale
• EU VAT paid — French customs import entry seen (Cannes bureau, 2012; TVA €76,321 at 19.6% on importation from USA)
• CE Declaration of Conformity

KNOWN DEFECTS

• Sprayhood requires replacement

HISTORY

ISKANDER was built by Nautor Swan in 2002 as hull number 169, the final Swan 44 Mk II to leave the Pietarsaari yard. Constructed in Finland and certified under US Coast Guard Builder's Certification (CG-1261), she was supplied new through Swan Italy to her first owner in Chicago, Illinois. During the first phase of her life she was sailed exclusively on freshwater on Lake Michigan, accumulating light hours in a particularly benign environment.

Her current owner subsequently acquired her and relocated her to Europe. In 2012 a comprehensive refit was carried out at Nautor Swan Villefranche, including the replacement of the standing rigging with rod rigging and the completion of formal EU customs importation, at which point French TVA was paid in full. French registration (Acte de Francisation) was initiated at Cannes at the same time. In 2013, a complete new North Sails wardrobe was commissioned, comprising a full battened Dyneema mainsail, a 108% furling jib in Dyneema, and a lazy bag. The mast has been repainted within the last twelve months.

Throughout her life ISKANDER has been consistently and carefully maintained. She is now offered for sale in very good overall condition and represents a genuine opportunity to purchase a well-found Nautor Swan at a realistic price.

The Nautor’s Swan 44 Mark II (often written “44 Mk II” or “44 (Frers)”) is a high?end Finnish performance/cruiser sailboat designed by German Frers and built by Nautor’s Swan between about 1996 and 2002. It is widely regarded as a classic bluewater cruiser?racer with excellent sailing performance, strong offshore capability, and very high build quality.

SAFETY

• Life raft: to be confirmed
• EPIRB: to be confirmed
• Flares: to be confirmed
• Fire extinguishers: fitted
• MOB equipment: fitted
• Jackstays: fitted
• Electric bilge pump
• Manual bilge pump